Galería San José de Flores
Local 61


Medios de transporte

Colectivos Líneas 1, 2, 5, 25, 36, 49 ,52, 53, 55, 63, 76, 85, 88, 92, 96, 99, 104, 113, 126, 132, 133, 134, 136, 141, 153, 163, 172, 180

Subterraneo Línea "A". A dos cuadras de la nueva estación Plaza Flores

Tren Línea "Sarmiento". A tres cuadras de la estación Flores

¿Como llegar?


Controladoras discos rigidos



Código:
0214021

PLACA PCI 2 PTOS E-SATA INITIO INIC 1623 VEL.TRANSF 1.5GBPS

CLICK AQUI !

para ver stock
y precio hoy

Marca: Initio
Código fabricante: INIC-1623
Página producto: Click aquí

Descripción del producto:
Placa controladora PCI SATA x2 Initito modelo INIC-1623. 2 puertos E-SATA. Chipset Initio Inic-1623 Serial ATA (SATA). Velocidad de transferencia hasta 1,5Gbps. 2 canales independientes de Serial ATA. 2 conectores mini dim de power; 2 conectores E-SATA y 1 conector de floppy. Soporta plug-play. Soporta hot plug de dispositivos externos sata. compatible con windows 98/me/nt 4.0/2000/xp/vista/mac os.

The Initio INIC-162x provides advanced Host Adapter features in a single 128 pin TQFP package with 2 Serial ATA, 32-bit/66 MHz PCI 2.3 compliant, and Cardbus compliant interfaces. The third memory interface allows access to FLASH and Serial EEPROM devices. The Flash interface provides Read/Write access to the attached BIOS. The Serial EEPROM interface provides Read/Write access to the attached Serial EEPROM for bus configuration information.

PCI 32 bit/66 MHz Interface:
* PCI 2.3 compliant interface.
* Burst transfer rate of 264 Mb/s.
* Built in hardware bus master engine

ATA Interface:
* Serial ATA Revision1.0a, Serial ATA II Revision 1.0 (Extensions to Serial ATA 1.0).
* Serial ATA transfer rate of 1.5 Gb/s.
* Supports two SATA/eSATA channels.
* Supports SATA NCQ, TCQ commands.

Memory Interface:
* Support for 256K FLASH and Serial E2PROM.

Data FIFO:
* 256 Byte data FIFO for each channel.

On Board PCI Bus Master Engine:
* On board Bus Master Engine relieve the system processor from book keeping and enhance performance.
Uses Initio Proprietary Host Adapter Mode of Operation:
* Initio Proprietary AutoDMA mode (IDMA).
* Queued/Overlapping ATA Commands Support.

Other Features:
* Disk RAID 0/1 support (only for inic-1622TA2/1623TA2).
* SATA hot plug/unplug hardware support.
* Implements Power Management.
* Full driver support for all Major Operating Systems.
* BIOS supports for DOS, Windows and MAC OS(only for inic-1623TA2) applications without driver involvement..
* Supports Plug and Play allowing users to change configurations without the use of jumpers.


PC Completas